YSI TruLab 1320P - Manual (Page 47)

TruLab pH/ISE 1320 Ion concentration
ba76157e01 03/2014
47
8.1.2 Measuring the temperature
For reproducible ion-selective measurements, it is essential to measure the
temperature of the test sample.
You have the following options to measure the temperature:

Measurement by an external temperature sensor.
 Manual determination and input of the temperature.
The measuring instrument recognizes whether a suitable sensor is connected
and automatically switches on the temperature measurement.
The display of the temperature indicates the active temperature measuring
mode:
If you wish to measure (or calibrate) without temperature sensor, proceed as
follows:
Temperatur
e sensor
Resolution of the
temp. display Temp. measurement
yes 0.1 °C Automatic with temperature sensor
- 1 °C Manual
1. Measure the current temperature of the test sample.
2. Set the temperature value with <><>.
or
In the <MENU/ENTER>/ISE/Man. temperature menu, set the tempera-
ture value with <><>.