Xylem MULTI 3500i HANDHELD MULTIPARAMETER METERS - Manual (Page 17)

Multi 3500i Operation
15
4.2.2 Navigation
Measured value display In the measured value display, you can
z select a measuring window with < ▲> <▼> and
open the relevant measuring menu by shortly pressing
<MENU/ENTER>.
z open the system menu with the sensor-independent settings by
pressing <MENU/ENTER> for a long time (approx. 1 s).
z change the display in the selected measuring window
(e. g. pH
< − > mV) by pressing <M>.
Menus and dialogs The menus for settings and dialogs in courses contain further sub-
menus. The selection is made with the <
▲> <▼> keys. The current se-
lection is displayed in reverse video.
z Submenus
The name of the submenu is displayed at the upper edge of the
frame. Submenus are opened by confirming with <MENU/ENTER>.
Example:
z Settings
Settings are indicated by a colon. The current setting is displayed on
the right-hand side. The setting mode is opened with
<MENU/ENTER>. Subsequently, the setting can be changed with
<
▲> <▼> and <MENU/ENTER>.
Example:
General
Interface
Clock function
Reset
System
Language : Deutsch
Beep : Off
Illumination : On
Contrast : 48 %
Temperature unit : °C
Switchoff time : 30 min
System