Xylem MULTI 3500i HANDHELD MULTIPARAMETER METERS - Manual (Page 67)

Multi 3500i Operation
65
5 Press <MENU/ENTER>.
The AutoRead measurement to determine the cell constant
starts.
6 Wait for the end of the AutoRead measurement or accept the
calibration value with <MENU/ENTER>.
The determined cell constant is displayed as a message (
i ).
7 You have the following options:
z Accept the new calibration values with <MENU/ENTER>.
Subsequently, the calibration record is displayed and output
to the interface at the same time.
z To switch to the measured value display without accepting
the new calibration values, press <M> or <ESC>.
i Cell constant = 0.481 1/cm
i Temperature = 24.8 °C
Terminate AutoRead
<CAL>
i Cell constant = 0.481 1/cm
i Sensor+++
Accept
<CAL>