Xylem MULTI 3500i HANDHELD MULTIPARAMETER METERS - Manual (Page 71)

Multi 3500i Operation
69
Data storage adminis-
tration
The two lower display lines indicate the use of the data storage calcu-
lated in advance for the selected settings:
Starting the automatic
data storage function
To start the automatic data storage function, select Continue with
<
▲> <▼> and confirm with <MENU/ENTER>. The measuring instru-
ment switches to the measured value display.
The active automatic data storage function can be recognized from the
progress bar in the status line. The progress bar indicates how much of
the adjusted storage duration has already expired.
Note
The automatic data storage function is interrupted if you start other
functions, e.g. output the data storage. After the other function has
been finished, the automatic data storage function is continued. Note
that this causes chronological gaps in the dataset series.
Store with ID no. 1
Interval 30 s
Duration 180 min
Continue
00d03h00min 00d15h
34min
<STO_>
Adjusted storage duration for the
entire dataset series
Maximum usable storage dura-
tion
Graphical display of the storage
use
pH
6.949
24.8
°C