Xylem MULTI 3500i HANDHELD MULTIPARAMETER METERS - Manual (Page 72)

Operation Multi 3500i
70
Terminating the auto-
matic data storage func-
tion prematurely
Proceed as follows to switch off the automatic data storage function be-
fore the adjusted storage duration has expired:
4.8.3 Editing the measured value storage
You can select the contents of the manual or automatic measured val-
ue storage by means of different filter criterions and
z read them out on the display, and
z output them to the interface.
Each measured value storage has a separate erasure function for the
entire contents, independent of the filter settings.
Editing the data storage The storage can be edited in the system menu, submenu Data storage.
To open the system menu in the measured value display, press the
<MENU/ENTER> key for approx. 1 s.
Note
The settings are explained here using the manual data storage as an
example. The same settings and functions are available for the auto-
matic data storage.
1 Press the <STO> key for a long time.
The following window appears.
2 Select and confirm Yes with <
▲> <▼> and <MENU/ENTER>.
The measuring instrument switches to the measured value dis-
play.
The automatic data storage function is terminated.
Stop automatic storage?
Yes
No
Warning