Canon EOS D30 - Manual (Page 134)

134
REFERENCE
Mode Blinking warning Description
Subject is too dark.
Subject is too bright.
Picture will be underexposed.
Picture will be overexposed.
Picture will be underexposed.
Picture will be overexposed.
The desired depth of field
cannot be obtained.
Subject is too dark.
Subject is too bright.
Remarks
Use flash.
Use a neutral density filter.
Turn the
〈 〉
dial to a
slower shutter speed.
Turn the
〈 〉
dial to a
faster shutter speed.
Turn the
〈 〉
dial to a
smaller aperture value.
Turn the
〈 〉
dial to a
larger aperture value.
1) Move farther from the
subject and try again.
2) If using a zoom lens, use
the shortest focal length.
Use a flash (the result will
be the same as using
Program AE
〈 〉
).
Use a neutral density filter.
Exposure Warnings
The warnings shown are examples using a lens with a minimum aperture value of
f/3.5, and a maximum aperture value of f/22. Actual maximum and minimum
aperture values will depend on the particular lens you use.
AE Lock Effects for Combinations of Focusing
Point Selection and Metering Method
Focusing point selection
Metering method
Evaluative metering
Partial metering
Center-weighted averaging
Auto selection AF
AE lock applied to the
metered value at the active
focusing point.
Manual selection AF
AE lock applied to the
metered value at the
selected focusing point.
AE lock applied to the metered value at the center focusing
point.
(when using a mode in the Creative zone)