Canon EOS D30 - Manual (Page 29)

29
Inserting and Removing the Battery Pack
1
Bef
ore Y
ou
Begin
Using a Household Power Supply
You can operate the EOS D30 from a household power outlet by using the DC coupler. This
enables you to use the camera as long as you like without a battery.
1 Connect the DC coupler.
● Plug the DC coupler into the compact
power adapter.
2 Place the cord in the groove.
● Carefully insert the cord into the groove.
3 Insert the DC coupler into the camera.
● Open the cover (→27) and lower the
covering on the cord channel.
● Insert the DC coupler and fit the cord into
the cord channel.
● Check that the cord is placed tightly in the
cord channel, and slide the DC coupler
into the chamber until it locks into place.
● Close the cover so that it clicks into place.
4 Connect the power cord.
● Connect the power cord to the compact
power adapter.
● Plug the cord into a power outlet.
● When you are finished, remove the plug
from the power outlet.
● Do not use any DC coupler other than the one provided with your EOS D30
camera.
● Do not use the DC coupler provided with your EOS D30 with any other camera.