B&K Precision 2516 - Manual - Manual (Page 113)

113
Figure 61 - Connection for AC Voltage Measurement
WARNING:
Never connect more than 750V AC across the
input terminals.
4.2 DC and AC Current Measurements
To measure DC current, press repeatedly until Meter is set to DCI.
To measure AC current, press repeatedly until Meter is set to ACI.
Table 44 – DC/AC Current Measurement Menu
Menu Option Setting Description
Relative
On
Save the current input value as a reference
value. Subsequent measurements will be the
difference from the reference value. This is the
same as “zeroing” the meter.
Off Relative mode is disabled.
Auto Select to enable autoranging.
Manual Select to enable manual ranging.
A Display measurement in amps (A). In manual
10 A mA COM V.Ω.C
AC Voltage