B&K Precision 2516 - Manual - Manual (Page 131)

131
NOTE:
The Scope Recorder function is only available when
the oscilloscope is in SCAN mode. SCAN mode is
automatically enabled when the oscilloscope
timebase is set between 100 ms to 50 s.
Before entering the Scope Recorder menu, verify that the oscilloscope is
operating in SCAN mode. Press to enter the oscilloscope
operation mode and set SCAN mode. SCAN mode is available only for
timebase 100 ms to 50 s.
From the Recorder menu, press to select Scope Recorder. The
scope record screen and menu will be displayed.
Table 49 - Scope Recorder Menu
Menu Option Description
Record Select record options
Replay Replay the recorded waveform.
Option Setup the parameters of waveform recorder.
Return Exit scope recorder function.
Table 50 - Record Options Menu
Menu
Option
Setting Description
Start Begin recording CH1 and/or CH2 waveforms.
Replay Select to replay the recorded waveform.