B&K Precision 2516 - Manual - Manual (Page 115)

115
Figure 62 - Connection for Low DC Current Measurement
WARNING:
Do not connect more than 600 mA DC current
across the mA input terminal or the protection
fuse will trip. Never input 10 A or more current
across the terminal or the instrument will be
damaged and warranty will be void.
Higher Current Measurements (Up to 10 A)
Follow these steps to make measurements up to 10 A.
1.
Connect the negative (-) side with the black test lead to the COM
input.
2.
Connect the positive (+) side with the red test lead to the 10A input.
3.
Probe with the test leads to the DUT and take the measured reading
on display.
Figure 63 - Connection for Higher DC Current Measurement
10 A mA COM V.Ω.C
DC Current
+ -
A
10 A mA COM V.Ω.C
DC Current
+ -
A