B&K Precision 2516 - Manual - Manual (Page 123)

123
4.6 Make Capacitance Measurements
To measure capacitance, press repeatedly until Meter is set to
“Cap.”.
Figure 70 - Capacitance Measurement
Table 46 – Capacitance Measurement Menu
Menu Option Setting Description
Relative
On
Save the current input value as a reference
value. Subsequent measurements will be the
difference from the reference value. This is
same as “zeroing” the meter.
Off Relative mode is disabled.
Trend Plot
Enters the Meter Trend plot mode (See “Meter
Trend Plot” for more information).
Configure relative settings from the menu.
WARNING:
Fully discharge the capacitor before connecting it
to any of the inputs or it may damage the
instrument.