B&K Precision 2516 - Manual - Manual (Page 69)

69
To set the pulse width for the pulse trigger condition, press in the
Pulse Trigger menu 1 to select Set Width and use or arrow
keys to adjust the width, which will be displayed when it is adjusted.
Figure 36 - Pulse Width Trigger Condition Display
Note: Trigger level cannot be changed while the Pulse Trigger Menu is
active because the SetWidth option shares the same arrow keys to make
changes.
Video Trigger
Video trigger can be used to capture waveforms of standard NTSC and
PAL/SECAM analog video signals.
Select Video under Type from the trigger menu.
Table 19 - Video Trigger Menu 1/2
Menu
Option
Setting Description