B&K Precision 2516 - Manual - Manual (Page 82)

82
Figure 43 - Overwrite Warning
14.
To exit the Directory menu, press
to go to Directory Menu
2, then press to select Return.
Note: Instrument setups will be saved as a .SET file and waveform traces
will be saved as a .DAV file. Both of these file types can only be recalled
from within the oscilloscope Save/Recall menu.
To recall setups or waveforms, do the following:
1.
From the Save/Recall menu, select the Type to Setups or
Waveforms depending on the type of file you want to recall.
2.
Then, set Save To as Device to recall from internal memory.
3.
Select the storage location you want to recall from by pressing
under Waveform option, then press to select
Recall. The setup or waveform will be recalled from the selected
location.
4.
To recall from external memory, set Save To as File, then press
to select Recall.
5.
The Directory menu will come up. Use the
and
arrow keys to highlight the .DAV (waveform) or .SET (setup) file you
want to recall, then press to select Load. If the file is
within another folder in the directory, select and open the directory