B&K Precision 2516 - Manual - Manual (Page 119)

119
NOTE: When the measurement unit is changed, range
will automatically change to Auto ranging.
CAUTION:
Always connect the test leads to the instrument
inputs first before connecting the DUT to avoid
potential shock hazard.
Follow these steps to make a measurement.
1.
Connect the black test lead to the COM input.
2.
Connect the red test lead to the V.Ω.C input.
3.
Probe with the test leads to the DUT and take the measured reading
on display.
Figure 66 - Connection for Resistance Measurement
WARNING:
Do not apply more than 1000 VDC across the
terminals or they will be damaged.
10 A mA COM V.Ω.C
Resistance