B&K Precision 2516 - Manual User Manual
Page 128
128
to selection NO or press
to select YES. Selecting
NO will cancel your changes and return to the Scope Trend Plot
menu.
NOTE:
If YES is selected, all data that has been recorded
previously will be deleted, including all data in
Param B.
5.
Follow steps 1-4 to select the second measurement parameter to
record for Param B by pressing
.
Pause Recording
By default, data is always recording continuously. To stop recording at any
time, press
to toggle between Run or Stop.
Restart Recording
To restart recording the data from the beginning, press
to select
Restart. The recording timer will reset back to 0:00:00 and all previously
recorded data will be cleared from memory.
Select Display Mode
The display settings on the trend plot can be changed. Users can select
viewing the data up to the minute, or select viewing all data in a
compressed format.
To toggle between the two display modes, go to the second page of the
Scope Trend Plot menu and press
to toggle between Normal and
View All.