B&K Precision 2516 - Manual - Manual (Page 72)

72
Return Return to the Video Trigger Menu.
Slope Trigger
Slope trigger can be used to trigger off a rising or falling edge with specified
slope timing conditions and vertical boundaries. It is similar to Edge trigger
but with more options users can setup to seek for specific slope conditions
from the selected source.
Select Slope under Type from the trigger menu.
Table 22 - Slope Trigger Menu 1/2
Menu
Option
Setting Description
Type Slope
Trigger on positive slope or
negative slope.
Source
CH1
CH2
Select trigger source.
When
(rising edge greater
than slope time
(rising edge less than
slope time)
(rising edge equal to
slope time)
(falling edge greater
than slope time)
(falling edge less than
slope time)
(falling edge equal to
slope time
Select trigger conditions.