B&K Precision 2516 - Manual - Manual (Page 145)

145
Multimeter
1.
After I change a menu selection, how do I set the changes and close
the menu window?
Press the or keys to set the menu changes and to close
the menu window.
2.
I cannot measure any current. Is there a problem?
There are 2 ports to measure current, one is labeled 10 A to
measure current up to 10 A. The other is labeled mA, which is
designed to only measure up to 600 mA. Both terminals have an
internal protection fuse. If you are not getting any measurements
from connecting to the correct port:
a. Check that there is current flowing from your DUT.
b. Your meter may not be in the correct range to make the
measurement. Change it to Auto range or change the range
manually to one suitable for the measurement.
c. Fuse may be blown for the 10 A input.