IAI America CON-PGA - Manual (Page 142)

6. Operation of SEP
Related Controllers
134
4) Inching (Use the arrow keys [Inching-] and [Inching+] to inch the actuator to the target position and then
acquire the achieved position (current position) as the forward end position or backward end position).
An example of operation mode 0 (standard movement between 2 points) is explained.
How to acquire the current position, or 30.0 mm, as the backward end position is explained.
No. Operation Screen Remarks
1 On the SEP menu screen:
Touch [Pos.Edit].
2 If the password is other than
"0000," the password input
screen appears.
Input a password.
You can set a password for
position setting from "Position
edit password" on the
parameter edit screen.
3 Set the position, acceleration
and deceleration relating to the
backward end position.
Touch [Backward Position].
Touch [Menu] to return to the
SEP menu screen.
4 Touch [Jog]. Touch [Menu] to return to the
position setting screen.
* Perform home return if not
already completed.
5 If the servo is off, touch [SV ON]
to turn on the servo.
6 Touch [Inching].
The display switches to the
inching screen.
Touch [Menu] to return to the
itemized position setting screen.