IAI America CON-PGA - Manual (Page 167)

6. Operation of SEP
Related Controllers
159
[Axis No. Set] Set the axis number.
Touch Axis No.
When the numeric keypad appears, enter a desired value and then
touch [ENT].
Touch [Execute].
In this example, 15 is set.
[Init Parameter]
The parameters are reset to their factory default settings.
Touch [Yes].
Touch [No] to return to the parameter menu screen without resetting
the parameters to their factory default settings.
Touch [Yes].
The controller is restarted.
The controller operate according to the factory-set parameters.
The display returns to the initial setting screen.
Touch [No], and the controller will not operate according to the factory-
set parameters until restarted.