IAI America CON-PGA User Manual
Page 78
5. Operation of CON Related Controllers
70
5.9.1 Jog/Inching Operation
[Jog operation]
You can perform jog operation.
operation on the jog screen
x
[Jog-], [Jog+] : The axis jogs while each button is touched. [Jog-] moves the axis in the negative
direction, while [Jog+] moves the axis in the positive direction.
x
[SV ON]
:Touching [SV ON] while the servo is off turns on the axis servo and { becomes lit.
Touching [SV OFF] while the servo is on turns off the axis servo and { becomes unlit.
x
[HOME]
:Touching [HOME] while home return is not yet completed causes the axis to return
home and { becomes lit.
x
[Chg Vel]
:The jog speed changes in the order of 1, 10, 30, 50 and 100 mm/s every time [Chg
Vel] is touched.
x
[Inching]
:Touching [Inching] changes to the inching screen.
x
[Menu1]
:Move to the Menu 1 screen.
x
[MV_Menu]
:Touch [MV_Menu] menu to return to the test run menu.