IAI America CON-PGA User Manual
Page 80
5. Operation of CON Related Controllers
72
5.9.2 Position Movement Operation
Move to a position or continuously to multiple positions registered in the position table.
x
[SV ON]
:Touching [SV ON] while the servo is off turns on the axis servo and { becomes lit.
Touching [SV OFF] while the servo is on turns off the axis servo and { becomes unlit.
x
[HOME]
:Touching [HOME] while home return is not yet completed causes the axis to return
home and { becomes lit.
x
[n], [p]
:Touch [n] and [p] to select a desired position number. The target position of the
selected position number appears.
x
[Chg Vel]
:The speed override changes to 10%, 50% and 100% every time [Chg Vel] is touched.
x
[Move]
:Touching [Move] moves the axis to the target position. The current position can be
checked by the display in Current Pos.
x
[Continuous] :Touching [Continuous] moves the axis continuously until Stop is touched.
x
[Stop]
:Touching [Stop] stops the axis.
x
[Menu1]
:Move to the Menu 1 screen.
x
[MV_Menu]
:Touch [MV_Menu] menu to return to the test run menu.