IntelliTrack WMS – Warehouse Management System - Manual (Page 107)

Chapter 6
Receiving
97
If the Prompt for location option is selected in the Options form/
Receiving tab of the WMS RF Server, you will see a Location field in
this screen. Enter the receiving location in the Location field. If the
order is being received into a pallet location, enter the pallet ID in the
Pallet field.
The default receiving location, as set in the Options form/Receiving tab
is automatically entered in the Location field. However, a new location
can be entered.
Press the <Tab> key. The cursor is placed in the Pallet field. Enter the
Pallet ID in the pallet field if items are being received to an existing
pallet. If items are not being received to an existing pallet, leave this
field blank.
If Receiving item label printing is enabled in the Options form/Print-
ing tab of the WMS RF Server, you will see a Label qty field in this
screen. Enter the amount of receiving item labels that you want to print
for this item in the Label qty field. The label amount specified will be
printed to the printer that you set in the RF Client Options upon item
confirmation.
Select the <F2> key to display the next Location.
Select the <F1> key to return to any previously displayed Location.
9. Press the <Enter> key to confirm the receipt. If you have more items in
the order, a confirmation screen appears.
10. Press the <Enter> to continue. The next item in the order is then dis-
played.
11. Repeat Steps 4–10 to receive the next item in the order.