IntelliTrack WMS – Warehouse Management System - Manual (Page 121)

Chapter 7
Picking
111
Screen > F7 Options > F5 Zone), your inventory selections for the pick-
ing process will be limited to the locations in the selected zone.
Inquire Order Option
All picking orders can be reviewed and selected for processing from this
option.
Note: Site, location, and item number are always required fields. Addi-
tional fields, such as unit of measure, pallet, serial number, lot, and expira-
tion date are only required if they were enabled during the setup process. If
these fields are not enabled, they not displayed.
1. From the Main menu, select the <F2> key. The Picking menu appears.
2. From the Picking menu, select the <F1> key (Inquire order). The
order with the lowest number is displayed first.
Select the <F2> key to advance to the next Picking order.
Select the <F1> key to scroll back through the displayed Picking
orders.
Select the <F3> (Stg) key to initiate the staging process on the dis-
played order.
Select the <F4> (Pck) key to initiate the picking process on the dis-
played order.