IntelliTrack WMS – Warehouse Management System - Manual (Page 69)

Chapter 3
RF Client
59
The Starting Screen Option
The Starting Screen option allows you to jump to a specific menu upon
successful login. These include the Main, Inventory, Picking, Receiving,
and Shipping Menus. Press <F3> to toggle through the options and select
the start screen. The default is set at Main menu.
The Wave Option
The Wave option allows you to select the orders that you want to display
during wave picking. The options include Open, Not Staged, or All. To
view all orders in the wave, select All; to view only the open orders in the
wave, select Open, to view orders in the wave that are not staged, select
Not Staged. Press <F4> to toggle through options and select the wave
option that you want to use. (The wave option is available with RF Profes-
sional only.)
The Zone Option
The Zone options allows you to select a picking zone. When you select a
picking zone, please note that all the inventory selections are limited to the
inventory in the selected zone locations. If you select the {Default} option,
zones are off, which means that all inventory is available during the pick-
ing process. Press <F5> to toggle through the zone options and select the
zone that you want to use. The {Default} option (no zone selected) is the
default setting. (The zone option is available with RF Professional only.)
The Printers Option
You are able to print receiving and put away item labels and new container
labels as well as packing slips to a user-selectable network printer. The
Printers option allows you to select two separate network printers: one
network printer for your bar code labels (receiving and put away item and
new container labels) and one network printer for your packing slip labels.
Press < F6> to reach the Printer Selection screen.