Configuring the generic settings, Configuring the softogo wireless telnet with, Intellitrack rf – IntelliTrack WMS – Warehouse Management System User Manual

Page 43

Advertising
background image

Chapter 2

Device Setup

33

Configuring the Softogo Wireless Telnet with
IntelliTrack RF

The IntelliTrack RF application may be used with the Softogo Wireless
Telnet Client to work with compatible handheld devices. In order for them
to work together properly, you must install and configure Wireless Telnet
Client on your PC and then send the configuration to the device.

Configuring
the Generic
Settings

The Wireless Telnet Client must be configured for IntelliTrack RF on the
PC. To configure the general settings in the client, first DOWNLOAD the
configuration utility for your specific portable from the Softogo website at

www.softogo.com

and install it on your PC-workstation. (For compatible

portable devices, please visit the IntelliTrack hardware support matrix at
the IntelliTrack website:

www.intellitrack.net

.)

Once the configuration utility is installed, it needs to be configured for Int-
elliTrack RF. To configure the utility for IntelliTrack RF, please refer to the
instructions that follow.

1.

Open the Wireless Telnet Client for your portable device on the PC
workstation from the Start menu by selecting Start > Wireless TelNet
WCE VT SSH
> Telnet Clients - Default Profile > Your Portable
TelNet Client Application
.

2.

The Wireless TelNet Installation screen appears.

3.

Select the Configure Generic Options button. The _WTnCE.iniedit -
IniEditor Multilingual window appears onscreen. Here, you will edit
the session settings.

Advertising