IntelliTrack WMS – Warehouse Management System - Manual (Page 132)

I NTELLI T RACK WMS RF V 8.1
RF Guide
122
At the Picking menu, the <F4> option is called Stage order when a
wave is not selected. When a wave is not selected the <F5> Wave
option displays (None).
If a wave is selected, press the <F5> key. The wave number screen
appears. Press <F3> to remove the selection. You are returned to the
Picking menu. At the Picking menu, the <F4> selection should now be
Stage order and the <F5> Wave selection should be (None).
3. From the Picking menu, select the <F4> key. The following screen
appears. To stage an order, enter the order number for staging in the
Order field.
4. Press the <Enter> key. The following screen appears:
Each screen lists the item number and the total item quantity for all
items in the order.
The <F2> key advances the operator through the item list.
The <F1> key returns to the previous item listed.
5. If you want to stage an item from the order, press the <Enter> key at
that item screen to process it for staging.
6. The following screen appears. It contains the “source” item location.
(If you are picking by zone, only the zone locations are available.)