IntelliTrack WMS – Warehouse Management System - Manual (Page 116)

I NTELLI T RACK WMS RF V 8.1
RF Guide
106
The system selects a “destination” location.
If you want to change the “destination” site, enter the desired site in
the Site field.
If you want to change the location, enter the new location in the Loca-
tion field.
13. When you are ready to continue, select the <Enter> key.
14. If you have enabled printing for put away item labels in the WMS RF
Server Options form\Printing tab, the Put Away Item Label screen
appears. Enter the amount of labels that you want to print for this put
away item in the Label qty field. The label or labels will be immedi-
ately printed at the default label printer as set in the RF Client options
upon item put away confirmation (see
“The Printers Option” on page 59
for more information about setting the default label printer).
15. A confirmation screen appears. Enter the “destination” location in the
Location field to confirm the put-away for this item.
16. When you are ready to continue, press the <Enter> key.
17. The next put-away item is displayed.
18. When you are finished, press the <ESC> key until you return to the
Put-away menu.
19. Press the <ESC> key again to return to the Receiving menu.
20. Press the <ESC> key again to return to the Main menu.
Pallet Put-
away To move a pallet from the receiving location to the final storage location,
please refer to the instructions that follow.