IntelliTrack WMS – Warehouse Management System - Manual (Page 77)

Chapter 4
Warehouse Management
67
Select the <F1> key to send a message to appear on the server. After
entering message, press the <ENTER> key to send.
Select the <F2> key to send a message to another portable device.
3. If you chose to send a message to a portable, scroll through the list of
current operators by pressing the <F2> key.
Press the <F1> key to return to a previously listed operator.
4. Select the operator. Next, enter your message in the Type message
field.
Press the <ENTER> key to send the message.
If the message has been sent to a portable device, the Message is dis-
played on the receiver’s portable.
If the message has been sent to the server application, the Message is
displayed in the Received portion of the Messages form in the server
application.
5. Press the <ESC> key to return to the Main menu.
Logging RF Errors
During program execution, if errors occur, the WMS RF server logs them
to the application log in the event viewer. The event viewer can be
accessed from the control panel.