IntelliTrack WMS – Warehouse Management System User Manual
Page 129
Chapter 7
Picking
119
The item’s UOM and Qty for the selected pick location are displayed at
this screen.
•
If you want to change the unit of measure, the <F1> key scrolls back
to the previously listed UOM selection. The <F2> key scrolls for-
ward to the item’s next UOM selection.
•
If you are able to fulfill the order quantity with the default UOM or
the UOM options, press the <Tab> key and enter the order quantity;
then select the <Enter> key to continue with the pick. (Skip the next
step since you are able to meet the pick ordered quantity with the
current selection.)
•
If the item being picked exceeds the pick ordered quantity because
the item UOM at this location is too high, you are able to perform an
inventory let down for this item by using the <F3> Letdown option;
please refer to the next step.
11.
If the item being picked requires a let down to meet the pick UOM
quantity at the selected location, place the UOM quantity for the let
down in the Qty field at the order quantity screen.
12.
Next, select the <F3> key.
The following screen appears.