IntelliTrack WMS – Warehouse Management System User Manual
Page 90
I
NTELLI
T
RACK
WMS RF
V
8.1
RF Guide
80
4.
Enter the “source” site (i.e., the site from which you are moving the
item) in the Site field. (Depending on your system option settings, the
default site may already be entered in the Site field.)
5.
Enter the “source” site Location in the Location field and press the
<TAB> key.
6.
Enter the Pallet in the Pallet field, if applicable.
7.
Press the <ENTER> key to continue. The following screen appears
with item data listed for that location.
The item's UOM is automatically listed.
The <F2> key advances the operator through the location item list.
The <F1> key returns to the previous listed item.
When you view the last record, a screen appears telling you that you are
at the last record.
8.
To continue with the Move Item function, select the Item # and press
the <ENTER> key.
9.
The following screen appears. Enter the Move quantity amount in the
Qty field and press the <ENTER> key. (Select the <F3> key to select
all the item's quantity in the location. If lot, expiration date, and/or
serial numbers are applicable, enter this information in this screen.)