Modifying the vt line mode setting – IntelliTrack WMS – Warehouse Management System User Manual
Page 33
Chapter 2
Device Setup
23
Modifying the VT Line Mode Setting
The VT Line Mode Setting also needs to be On.
1.
To modify the VT Line Mode setting, click the plus sign (+) next to
the Emulation folder in the navigation tree found in the left pane of the
hostcfg.bin-CFGMgr screen. The contents of this folder display. Next,
click the plus sign (+) next to the VT and HP folder. The contents of
this folder display. Next, click the plus sign (+) next to the Common
folder. The contents of this folder display. Next, click the plus sign (+)
next to the VT folder. The contents of the folder display. Click the plus
sign (+) next to the VT Line Mode file to view the VT Line Mode set-
ting. By default this setting is off.
2.
If VT Line Mode is turned off, you must turn it on. To turn on VT Line
Mode, select VT Line Mode in the navigation tree (found in the left
pane of the screen) and then right-click. A right-click menu appears.
3.
Select Edit from the right-click menu. A VT Line Mode dialog
appears.
4.
Click the drop-down arrow underneath the Use VT Line Mode? field,
and select On from the choices that appear.
5.
Click OK to close the VT Line Mode dialog box. The VT Line Mode
setting should now be On.
6.
Select File > Save, or click the Save button to save your settings in the
hostcfg.bin-CFGMgr screen.
7.
Select File > Exit to close the hostcfg.bin-CFGMgr Screen and return
to the Host Profiles dialog box.
8.
Close the Host Profiles dialog box by clicking the close icon (X) in the
top right corner of the screen.
Navigation
Tree