Adding key macros – IntelliTrack WMS – Warehouse Management System User Manual
Page 37
Chapter 2
Device Setup
27
3.
Select Edit from the right-click menu. A VT Line Mode dialog
appears.
4.
Click the drop down arrow underneath the Use VT Line Mode? field
and select On from the choices that appear.
5.
Click OK to close the VT Line Mode dialog box. The VT Line Mode
setting should now be On.
6.
Click File > Save from the menu bar to save this setting.
Adding Key Macros
You need to map the F5 key and the ESC key. To map these keys, continue
working at the termcfg.bin-CFGMgr screen:
1.
From the termcfg.bin-CFGMgr screen, click the plus sign next to the
Emulation folder in the navigation tree found in the left pane of the
screen. The contents of this folder display. Next, click the plus sign
next to the Common folder. The contents of this folder display. Next,
click the Key Macros selection to display the Key Macros settings.
2.
To add a mapping, select Key Macros in the navigation tree, and then
right-click.
3.
A right-click menu appears: