IntelliTrack WMS – Warehouse Management System - Manual (Page 118)

I NTELLI T RACK WMS RF V 8.1
RF Guide
108
7. Select the Destination location.
8. Press the <Enter> key. The Confirm screen appears. Enter the pallet
location in the Location field on the confirmation screen and then
press the <Enter> key to continue.
9. The “source” site and location screen appears again. Repeat steps 4–8
to put-away another pallet.
10. When you are finished, press the <ESC> key after the confirmation
screen until you return to the Put-away menu.
11. Press the <ESC> key again to return to the Receiving menu.
12. Press the <ESC> key again to return to the Main menu.