IntelliTrack WMS – Warehouse Management System - Manual (Page 139)

Chapter 7
Picking
129
The <F1> key advances to the next UOM for the item.
The <F2> key returns to the previous listed UOM for the item.
The <F3> key opens the inventory letdown screen for the item. If the
order item’s UOM quantity is too high for the required pick, you are
able to perform an inventory let down by selecting the <F3> key.
If you are able to fulfill the order quantity for staging, select the UOM
and quantity and then select the <Enter> key to continue with the pick.
(Skip the next step since you do not have to perform an inventory let
down to meet the pick ordered quantity.
If the item being picked exceeds the pick ordered quantity because the
item UOM at this location is too high, you are able to perform an inven-
tory let down; please refer to the next step.
8. If the item being picked requires a let down to meet the pick UOM
quantity at the selected location, place the UOM quantity for the let
down in the Qty field at the order quantity screen. Next, select the
<F3> key.
The Letdown screen appears.
• The Letdown screen asks you if you want to let this inventory down
to the next item UOM in the item’s UOM hierarchy. Select the
<Enter> key to convert the item’s UOM.
You are returned to the order item quantity screen.
• If the item being picked still requires a let down to the next UOM in
order to meet the pick UOM quantity, perform another let down for
the item UOM. Continue with the let down process until the item/
location quantity being picked meets the UOM quantity in the pick
order.
When you are able to fulfill the order quantity, select the UOM in the
UOM field, enter the quantity in the Qty field, and select the <Enter>
key to continue.
9. Depending on your system settings, the following screen may appear. If
you don’t see this screen, skip ahead to the next step.