Teledyne LeCroy WaveJet 300A Series Remote Control - Manual (Page 11)

WaveJet 300A Remote Control Manual
917976 Rev A
11
<NR2 NUMERIC RESPONSE DATA> No
<NR3 NUMERIC RESPONSE DATA> Yes
<HEXADECIMAL RESPONSE DATA> No
<BINARY NUMERIC RESPONSE DATA> No
<STRING RESPONSE DATA> No
<DEFINITE LENGTH ARBITRARY BLOCK
RESPONSE DATA>
Yes
<INDEFINITE LENGTH ARBITRARY BLOCK
RESPONSE DATA>
No
2.10 Device-to-device message transfer traffic that does not follow the rules for <RESPONSE
MESSAGE> elements
None.
2.11 Size of block data responses
Block data response is made for DTWAVE query, DTSTUP query, and TSCRN query.
Table 2-6. Size of block data responses (MLEN 500K,
DTPOINTS 500000 and DTSTART 0)
Query Status Size of block data
DTWAVE? Normal Sampling 500,010 bytes
DTWAVE? Average Sampling 1,000,010 bytes
DTWAVE? Multiplication Wave 2,000,010 bytes
DTWAVE? Other Sampling 500,010 bytes
DTSTUP? (Constant) 476 bytes
TSCRN? TIFF 308,956 bytes
TSCRN? BMP 308,288 bytes
TSCRN? PNG (Variable)
2.12 List of common commands and queries which are implemented
Table 2-7. List of common commands and queries
Mnemonic Name Implemented?
*AAD Accept Address Command No
*CAL? Calibration Query No
*CLS Clear Status Command Yes
*DDT Define Device Trigger Command No
*DDT? Define Device Trigger Query No
*DLF Disable Listener Function Command No
*DMC Define Macro Command No
*EMC Enable Macro Command No
*EMC? Enable Macro Query No
*ESE Standard Event Status Enable Command Yes