Teledyne LeCroy WaveJet 300A Series Remote Control - Manual (Page 23)

WaveJet 300A Remote Control Manual
917976 Rev A
23
Data transfer DTINF?
Query
DESCRIPTION The DTINF? query reads the waveform information.
COMMAND SYNTAX
QUERY SYNTAX DTINF?
RESPONSE FORMAT See below
REMARKS This command does not support the multi-command.
DTINF? result format
All following items are returned in one line, comma separated.
Item number
(4ch/2ch) Item (with result
sample )
Explanation Notes
1/1 ModelName =
LeCroy WJ354
Scope model
name
2/2 FileVersion = 1 Version of this
information
format
3/3 SaveTime =
2006/08/09
15:13:34
Date and time of
this waveform
information
creation
4/4 [Channel1] Category name
for Channel 1
vertical
information
5/5 Volts/div = 5.00V Ch1 Volts/div
when the last
waveform was
acquired Probe ratio is not
considered.
6/6 Offset = 7.50V Ch1 offset when
the last
waveform was
acquired Probe ratio is not
considered.
7/7 Waveform =
Available
Ch1 waveform
data
availability This could be
[Unavailable] by
some condition, for
example:
- Trace is off
- Scope is not
triggered yet
8/8 [Channel2] Category name
for Channel 2
vertical
information
9/9 Volts/div = 100mV Ch2 Volts/div
when the last
waveform was
acquired Probe ratio is not
considered.
10/10 Offset = -150mV Ch2 offset when
the last
waveform was Probe ratio is not
considered.