Teledyne LeCroy WaveJet 300A Series Remote Control - Manual (Page 28)

WaveJet 300A Series
28
917976 Rev A
Horizontal EQU
Command/Query
DESCRIPTION The EQU command enables or disables the equivalent
sample. The EQU? query returns the enabled or disabled
equivalent sample status.
COMMAND SYNTAX EQU <state>
<state>:={ON, OFF}
QUERY SYNTAX EQU?
RESPONSE FORMAT <state>
REMARKS When XYDS is XY, equivalent sample is turned off and
EQU ON is ignored without error.
Status *ESE
Command/Query
DESCRIPTION The *ESE command defines the standard event status
enable (ESE) register. This command allows the user to
connect multiple events in the ESR register to the ESB
summary message bit (bit 5) of the STB register. The
*ESE? query reads the contents of the ESE register.
COMMAND SYNTAX *ESE <value>
<value>:=0 to 255
QUERY SYNTAX *ESE?
RESPONSE FORMAT <value>
The current contents of the ESE register are identified
in <value>. The format is <NR1 Numeric Response Data>.