Teledyne LeCroy WaveJet 300A Series Remote Control - Manual (Page 9)

WaveJet 300A Remote Control Manual
2.6 Functional elements used in constructing device-specific commands
Whether <compound command program header> elements are used must also be included.
Table 2-2. Device listening functional elements
Element Implemented?
<PROGRAM MESSAGE> Yes
<PROGRAM MESSAGE TERMINATOR> Yes
<PROGRAM MESSAGE UNIT> Yes
<PROGRAM MESSAGE UNIT SEPARATOR> Yes
<COMMAND MESSAGE UNIT> Yes
<QUERY MESSAGE UNIT> Yes
<COMMAND PROGRAM HEADER> Yes
<QUERY PROGRAM HEADER> Yes
<PROGRAM HEADER SEPARATOR> Yes
<PROGRAM DATA SEPARATOR> Yes
<PROGRAM DATA> Yes
<DECIMAL NUMERIC PROGRAM DATA> Yes
<CHARACTER PROGRAM DATA> Yes
<SUFFIX PROGRAM DATA> Yes (see Figure 2-1)
<NON-DECIMAL NUMERIC PROGRAM DATA> No
<STRING PROGRAM DATA> No
<ARBITRARY BLOCK PROGRAM DATA> Yes
<EXPRESSION PROGRAM DATA> No
<w hite space> <suffix m ult> <suffix unit>
Figure 2-1. <SUFFIX PROGRAM DATA> element
• Enter <white space> according to IEEE488.2.
• Enter <suffix mult> in <upper/lower case alpha> according to IEEE488.2.
• Enter <suffix unit> according to IEEE488.2.
The following combinations only can be used for <compound command program header>.
917976 Rev A
9