Teledyne LeCroy WaveJet 300A Series Remote Control User Manual
Page 42
WaveJet 300A Series
42
917976 Rev A
Trigger TCOUNT
Command/Query
DESCRIPTION
The TCOUNT command defines the number of pulses for
pulse count trigger (TTYP=COUNT).
The TCOUNT? query returns the currently set number of
pulses for pulse count trigger.
COMMAND SYNTAX
TCOUNT <number>
<number> := 1 to 9999
QUERY SYNTAX
TCOUNT?
RESPONSE FORMAT
<number>
REMARKS TCOUNT
command reports device-specific error (DDE) when
TTYP is not COUNT.
Trigger TCPL
Command/Query
DESCRIPTION
The TCPL command defines the trigger coupling mode. The
TCPL? query returns the defined trigger coupling.
COMMAND SYNTAX
TCPL <tirg_coupling>
<trig_coupling>:={AC, DC, HF, LF}
QUERY SYNTAX
TCPL?
RESPONSE FORMAT
<trig_coupling>
The current trigger coupling is identified in
<trig_coupling>.
REMARKS
When TSRC is LINE or TTYP is TV, TCPL command reports
device-specific error (DDE) and TCPL? query returns DC.