Teledyne LeCroy WaveJet 300A Series Remote Control User Manual
Page 58
WaveJet 300A Series
58
917976 Rev A
Acquisition WSGL
Command/Query
DESCRIPTION
WSGL sets the trigger mode to "SINGLE".
WSGL? also sets the trigger mode to "SINGLE", and then
waits the single measurement to be done. The WSGL? query
is used to synchronize the application program with the
completion of waveform data acquisition.
COMMAND SYNTAX
WSGL
QUERY SYNTAX
WSGL?
RESPONSE FORMAT
+000001
REMARKS
WSGL/WSGL? reports device-specific error (DDE) and
does not performed when XYDS is XY.
DISPLAY XYDS
Command/Query
DESCRIPTION
The XYDS command selects YT, XY, or XY(Triggered)
display type. The XYDS? query returns the current
display type.
COMMAND SYNTAX
XYDS <type>
<type> := {YT, XY, XYTRG}
YT := Select display type YT
XY := Select display type XY
XYTRG := Select display type XY(Triggered)
QUERY SYNTAX
XYDS?
RESPONSE FORMAT
<type>
§ § §