Teledyne LeCroy WaveJet 300A Series Remote Control - Manual (Page 50)

WaveJet 300A Series
50
917976 Rev A
Data transfer TSCRN?
Query
DESCRIPTION The TSCRN? query transfers the screen data in TIFF, BMP
or PNG graphic file format.
COMMAND SYNTAX
QUERY SYNTAX TSCRN? <type>
<type>:={TIFF, BMP, PNG}
RESPONSE FORMAT #8<byte_length><binary_block>
• #8 shows that the response message is described in
the format of <Definite Length Arbitrary Block Response
Data> and the content of the following <byte_length>
is 8-digit data.
• The contents of <byte_length> represents the number
of bytes to be entered into <binary_block>. The byte
length is always sign-free, 8-digit integer without
suppressing the leading zero.
• The contents of <binary_block> represent the binary
data described in the specified graphic file format.
REMARKS This command does not support the multi-command.
Trigger TSLP
Command/Query
DESCRIPTION The TSLP command defines the trigger slope. The TSLP?
query returns the currently defined trigger slope.
COMMAND SYNTAX TSLP <slope>
<slope>:={POS, NEG}
QUERY SYNTAX TSLP?
RESPONSE FORMAT <slope>
The currently defined trigger slope is identified in
<slope>.
REMARKS