Teledyne LeCroy WaveJet 300A Series Remote Control - Manual (Page 25)

WaveJet 300A Remote Control Manual
917976 Rev A
25
23/15 [Acquisition] Category name
for acquisition
information
24/16 Memory Length =
500000
Actual memory
length of
acquired
waveform This is not the
setting of Max
Memory Length but
the data record
length of current
waveform.
25/17 Average Count = 0 Number of
averaged times
of the last
waveform. This is the actual
averaged times. The
value could be any
number between 0 and
256.
26/18 Wave Info = Peak
Roll
Acquisition
mode of the last
waveform. This is the acquired
waveform
information in
combination of
[Normal, Peak,
Average, Roll, Equ,
Interleave]
27/19 [Timebase Info] Category name
for timebase
information
28/20 Time Stamp =
15:13:34.7
Timestamp of
the last
waveform
acquisition
29/21 Sampling = 100kS Sampling rate
when the last
waveform was
acquired