Teledyne LeCroy WaveJet 300A Series Remote Control - Manual (Page 52)

WaveJet 300A Series
52
917976 Rev A
Trigger TTYP
Command/Query
DESCRIPTION The TTYP command selects the trigger type.
The TTYP? query returns the currently selected trigger
type.
COMMAND SYNTAX TTYP <type>
<type> := {EDGE, PULSE, PERIOD, COUNT, TV}
QUERY SYNTAX TTYP?
RESPONSE FORMAT <type>
<type>:= Set trigger type
REMARKS
Trigger TVCUST
Command/Query
DESCRIPTION The TVCUST command defines field frequency and number
of scan line for custom TV trigger.
The TVCUST query returns the currently defined field
frequency and number of scan line.
COMMAND SYNTAX TVCUST <field>,<line>
<field> := 10 to 99. Then the field frequency is set
to 1/<field>.
<line> := 100 to 3000. Then the number of scan lines
is set to <line>.
QUERY SYNTAX TVCUST?
RESPONSE FORMAT <field>,<line>
REMARKS TVSTD command reports device-specific error (DDE) when
TTYP is not TV or TVSTD is not CUSTOM.