Teledyne LeCroy WaveJet 300A Series Remote Control - Manual (Page 21)

WaveJet 300A Remote Control Manual
917976 Rev A
21
Automatic Measurement DIRM
Command/Query
DESCRIPTION The DIRM command sets the direction of automatic
measurement from A, B, C, and D.
The DIRM? query returns the currently selected
direction.
COMMAND SYNTAX DIRM <dir>
<dir>:={A, B, C, D}
QUERY SYNTAX DIRM?
RESPONSE FORMAT <dir>
The current direction status of the automatic
measurement, A, B, C, or D, is identified in <dir>.
Data transfer DTBORD
Command/Query
DESCRIPTION The DTBORD command defines the order of bytes for the
WORD or DWORD waveform data transfer. (Do not affect
ASCII and BYTE data transfer.)
The DTBORD? query returns the defined byte order.
COMMAND SYNTAX DTBORD <order>
<form>:={H/L, L/H}
H/L := transfer WORD or DWORD data in (most) upper byte
first.
L/H := transfer WORD or DWORD data in (most) lower byte
first.
QUERY SYNTAX DTBORD?
RESPONSE FORMAT <order>
The byte order is identified in <form>.
REMARKS