Yokogawa IR400 - Manual (Page 34)

5 - 1
IM 11G02N01-01E
Name
(1) MODE key
(2) SIDE key
(3) UP key
(4) DOWN key
Description
Used to switch the mode.
Used to change the selected item
(by moving the cursor) and
numeral digit.
Used to change the selected item
(by moving the cursor) and to
increase numeral value.
Used to change the selected item
(by moving the cursor) and to
decrease numeral value.
Name
(5) ESCAPE
key
(6) ENTRY
key
(7) ZERO key
(8) SPAN key
Description
Used to return to a previous screen
or cancel the setting midway.
Used for confirmation of selected
items or values, and for execution
of calibration.
Used for zero calibration.
Used for span calibration.
This section describes the display unit and operation panel of the analyzer unit. It also explains the name
and description of function on the operation panel.
5.1 Name and description of operation panel
Fig. 5-1
MODE
POWER
ESC ZERO
ENT SPAN
5. DESCRIPTION OF DISPLAY AND OPERATION PANELS