7 parameter setting – Yokogawa IR400 User Manual

Page 66

Advertising
background image

6 - 27

IM 11G02N01-01E

6.7 Parameter setting

It allows you to carry out the parameter setting such as time, key lock, etc., as required. Items to be
set are as follows:

MODE

(

)

ENT

• Current Time

: Current year, month, date, day of the week, hour, and minute setting

(The display appears in this order.)
Note: The clock backup time is 2 days. If power is turned on after it is kept off

for 2 days or longer, make the time setting again.

• Key Lock

: Sets with ON/OFF so that any key operation except the key lock OFF cannot be

performed.

• Output Hold

: Sets whether Calibration Output is held or not, and the holding value setting.

• Reset Av. Output

: Resets the average value.

• Response time

: Sets the response time of electrical system.

• Average Period

: Sets the moving average time.

• Backlight Timer

: Sets automatic OFF of the backlight of display unit and the time until backlight out.

• Maintenance mode

: Enters passwords to switch to the Maintenance mode.

Description of setting items

* For the maintenace mode, see Item 6.8.

(1) To display the User mode, press the

MODE

key in the measurement mode.

(2) Point the cursor to “Parameter Setting”

by pressing the

or

key. Press the

ENT

key.

(3) In the “Parameter Setting” screen that

appears, point the cursor to any item you
want to set by pressing the

or

key. Press the

ENT

key.

(

)

ENT

Advertising