SilentKnight VisorAlarm ARLY Interface - Manual (Page 33)

VISOR ALARM – ARLY Configuration
II - 28
Doc.DM359-I
Rev.2.0
New MIP instalation (register) : 633
MIP loss of contact : 350
VisorALARM network failure : 356
MIP goes to backup mode : 394
MIP sending events to backup VisorALARM : 395
VisorALARM down-active : 396
Primary VisorALARM down : 399
Secondary VisorALARM down : 358
Alarm store occupation reaches 100% : 393
MIP input active/deactive : 110
MIP input sensor trouble : 380
MIP tamper : 383
MIP PSTN Supervision : 351
MIP change detected : 306
VisorALARM supervised hdw fault : 300
MIP HW Failure : 333
VisorALARM time inaccurate : 397
VisorALARM AC loss : 301
VisorALARM low system battery : 302
VisorALARM log cleared : 621
VisorALARM log 50% loaded : 622
VisorALARM log 90% loaded : 623
VisorALARM log overflowed : 624
VisorALARM log saved to file : 655
ARLY-1 Cfg>
b) LIST ALARM-RECEIVER
Lists the configuration parameters relative to the receiver emulation.
Syntax:
ARLY-1 Cfg>list alarm-receiver
Example:
ARLY-1 Cfg>list alarm-receiver
Alarm Receiver Parameters:
-------------------------
Protocol: ademco-685
Receiver ID: 1, Line ID: 0
Link test timer: 120
Receiver specific parameters:
Blocking: NONE
c) LIST BACKUP-ALARM-RECEIVER
Displays the information on the receiver backup functionality parameters.
Syntax:
ARLY-1 Cfg>list backup-alarm-receiver
Example: