SilentKnight VisorAlarm ARLY Interface - Manual (Page 57)

VISOR ALARM – ARLY Configuration
II - 52
Doc.DM359-I
Rev.2.0
ARLY-1 Cfg>UPDATE MIP <account number>
default sets default values to an existing or a new
entry
serial-number MIP current serial-number
receiver-ip Public IP address which MIP uses to send
alarms
receiver-udp-port UDP port used to exchange info
usr-password MIP console protected password
mip-password MIP encrypt password used to send alarms
receiver-password Encrypt password this eq. uses on mssg to
that MIP
keep-alive-timer MIP keep-alive timer in seconds
keep-alive-retries MIP keep-alive num of retries
keep-alive-retries-timer MIP time between keep-alive retries in
seconds
phone-length Number DTMF digits Alarm Panel dials to make
calls
alarm-tx-retries Times MIP retransmmit an alarm before abandon
callback-phone Phone number Alarm Panel dials to make a
callback
bck-receiver-ip Public IP address which MIP uses to send
alarms to the backup VisorAlarm
bck-keep-alive-timer MIP keep-alive timer in seconds for backup
VisorAlarm
bck-keep-alive-retries MIP keep-alive num of retries for backup
VisorAlarm
bck-keep-alive-retries-time MIP time between keep-alive retries in
seconds for backup VisorAlarm
reset reset remote MIP
pstn-action Action to be done in the MIP when PSTN fail
subscriber-telephone The subscriber┤s telephone in whose premises
are the mIP installed.
last-update-time The date and time of the last MIP
configuration update
anti-substitution Enabling mechanism for detecting the MIP
substitution.
a) UPDATE MIP accnt Default
Remotely updates the mIP/IPDACT specified through the account number with all the parameters
currently available.
Syntax:
ARLY-1 Cfg>UPDATE MIP accnt DEFAULT
accnt MIP account number. This is composed of up to 6 hexadecimal digits
(0 to 9, A, B, C, D, E and F). The range is from 000001 to FFFFFF.
Example:
ARLY-1 Cfg>UPDATE MIP 101234 DEFAULT
ARLY-1 Cfg>
b) UPDATE MIP accnt RECEIVER-IP
Configures the alarm receiver IP address in the mIP/IPDACT.
Syntax:
ARLY-1 Cfg>UPDATE MIP accnt RECEIVER-IP ip_address
ip_address Alarm receiver IP address.
Example: