SilentKnight VisorAlarm ARLY Interface - Manual (Page 35)

VISOR ALARM – ARLY Configuration
II - 30
Doc.DM359-I
Rev.2.0
ARLY-1 Cfg>list cfg-pattern n
Example:
ARLY-1 Cfg>list cfg-pattern 1
Config Pattern ID : 1
Instalator Password : 1111
Alarm Receiver IP address : 81.23.69.152
Backup Alarm Receiver IP address : 81.23.70.54
Maintenance Receiver IP address : 81.23.56.89
Maintenance Alarm Password : 2AB4
Alarm Receiver UDP Port : 1222
MIP MIP Console Password : 1111
MIP Password : 220771B
Alarm Receiver Password : 220771B
Keep-alives.
Timer : 21
Retries : 3
Retries Timer : 5
Backup Receiver Keep-alives.
Timer : 15
Retries : 4
Retries Timer : 1
Alarm Transmission Retries : 2
Telephone Number Length : 9
Callback Telephone Number :
Zone ID for local events :
ARLY-1 Cfg>
e) LIST IO-CONF
Lists the configuration parameters relative to the receiver’s inputs and outputs.
Syntax:
ARLY-1 Cfg>list io-conf
Example:
ARLY-1 Cfg>list io-conf
I/O Configuration:
-----------------
Input 1
: AC Loss
Input 2 : Low Battery
Output 1 : System-trouble-unrestored
Output 2 [fixed] : System failure
f) LIST MONITOR-IP-ADDR
Lists the monitoring parameters for the VisorALARM Internet connection.
Syntax:
ARLY-1 Cfg>list monitor-ip-addr
Example: