SilentKnight VisorAlarm ARLY Interface - Manual (Page 47)

VISOR ALARM – ARLY Configuration
II - 42
Doc.DM359-I
Rev.2.0
Syntax:
ARLY-1 Cfg>MIP accnt CALLBACK-PHONE telephone_number
telephone_number Telephone number dialed by the control panel to execute bi-
directional in call-back mode.
Example:
ARLY-1 Cfg>MIP 101234 CALLBACK-PHONE 918076123
ARLY-1 Cfg>
To return to the default configuration for this parameter, use the following command:
ARLY-1 Cfg>NO MIP accnt CALLBACK-PHONE telephone_number
n) MIP accnt BCK-KEEP-ALIVE-TIMER
This parameter is the same as the keep-alive-timer however it is applied to the backup
VisorALARM.
Syntax:
ARLY-1 Cfg>MIP accnt BCK-KEEP-ALIVE-TIMER time
Time Time in seconds between keep-alive frames. Admits values between 0
and 90.
Example:
ARLY-1 Cfg>MIP 101234 BCK-KEEP-ALIVE-TIMER 30
ARLY-1 Cfg>
To return to the default configuration for this parameter, use the following command.
ARLY-1 Cfg>NO MIP accnt BCK-KEEP-ALIVE-TIMER time
If you use a value of zero for the “bck-keep-alive-timer parameter”, the mIP/IPDACT
will not send supervision trafic to the receiver and the VisorALARM will not be able to
access the device for remote configuration.
o) MIP accnt BCK-KEEP-ALIVE-RETRIES
This parameter is the same as the keep-alive-retries however it is applied to the backup
VisorALARM.
Syntax:
ARLY-1 Cfg>MIP accnt BCK-KEEP-ALIVE-RETRIES num_times
num_times Number of times keep-alive frames are sent in situations where
responses are not received. Admits values between 1 and 9.